MP frameconnectors and brakecable

[Belgium R/T -68]

Anyone having pictures on the interaction between the MP subframeconnectors and the parkingbrakecable now when it's
time for installation. Thanks 

[firefighter3931]

Per, my e-brake cable sits on top of the connector. I posted some pics awhile back of the SF connectors but can't remember what thread it was in. 



Ron

[Belgium R/T -68]

Ron, hope your memory comes back as you know "a picture says moore then thousand words". 

[Nacho-RT74]

http://www.dodgecharger.com/forum/index.php/topic,1657.0.html

not too much about E-brake setup pics but is a begining


I think will make that upgrade someday in the future BUT I don't think need to go with MP or any brand. They can be easily homemade 

[bill440rt]

Per, my e-brake cable sits on top of the connector. I posted some pics awhile back of the SF connectors but can't remember what thread it was in. 



Ron

Mine did the same thing.
Tip: place a small piece of tubing over the cable where is runs over the connector. Windshield washer squirter hose is about right, saves from rattling or scratching your paint on the connector. Other guys drill a hole & weld in a piece of steel piping where the cable goes thru. Mancini advised against this as it will weaken the connector.