71/72 Dodges with the Ramcharger Hood

[rich4406bbl]

Was the switch used to activate the hood on cars with the N96 Ramcharger hood labeled "Ramcharger", "Carb Air" or was it called "Air Grabber" like on the Plymouths. If it was different does anyone know who makes a repo of the bezel or at least a label? Any pics would of course help.

[41husk]

The switch is labeled Open, closed The n96 option was called Ramcharger on dodges and air grabber on plymouths, the dodge decal on the door has a scat pack bee head followed by the words RAMCHARGER, the plymouths had a shark with the words AIR GRABBER in its mouth for the decal.

[41husk]

I believe I got my switch bezal from BE/A parts the switch is a little harder Wilson productions made me one from an old rear air defrost switch housing at around $300 they are pretty hard to find.

[1972Rallye]

The bezel says "AIR GRABBER" like on Plymouths with "CLOSED and "OPEN" underneath.

Here is the best pic I could come up with.  It gets fuzzy, but you should be able to make it out.

[rich4406bbl]

Thanks guys! I knew the differences between the hood decals and what the systems were called. I have (3) switches but no bezels and I wanted to get the correct bezel just in case they were different

[41husk]

I believe the bezel cost about $20

[71_Charger_R/T]

Here's a repro decal 
http://cgi.ebay.com/ebaymotors/71-72-Road-Runner-GTX-Charger-air-grabber-switch-decal_W0QQitemZ390000618775QQihZ026QQcategoryZ140720QQssPageNameZWDVWQQrdZ1QQcmdZViewItem