News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

I have the specs on my cam, please explain

Started by CB, July 17, 2008, 05:36:56 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

CB

July 17, 2008, 05:36:56 PM
MC 2032
cam specs      int      exh
dur @0.050   214     224
valve lift        .443   .465
lobe sep        107     117
lash hot        HYD
K=19=07

OK, this are the specs so please someone tell me what I got? What is this camshaft compared to an original?
Thanks ;)
CB
1968 Dodge Coronet 500

firefighter3931

#1
July 17, 2008, 06:00:32 PM
Christian, that is a mild cam....similar in specs to a stock replacement. It should idle nice and make lots of vacuum for easy tuning.  :2thumbs:



Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs

Rolling_Thunder

#2
July 17, 2008, 06:41:52 PM
Quote from: firefighter3931 on July 17, 2008, 06:00:32 PM
Christian, that is a mild cam....similar in specs to a stock replacement. It should idle nice and make lots of vacuum for easy tuning.  :2thumbs:



Ron

:cheers:
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

john108

#3
July 17, 2008, 11:12:29 PM
Please excuse the interruption, but what does the following mean:

lobe sep        107 Int     117 exh

I thought that the lobe separation angle was a single angle between the intake and exhaust lobes??

Chryco Psycho

#4
July 18, 2008, 12:14:12 AM
should be lobe CL

CB

#5
July 21, 2008, 12:09:58 PM
ok thanks
nothing special I suppose :shruggy:
CB
1968 Dodge Coronet 500
Print
Go Up Pages1
User actions