Gas puddling in intake valleys

[Savage6]

Hey guys.. looks like I am getting small puddles of gas under the carb in the intake valleys.. anyone have any suggestions.. I was thinking my float level may need adjusting..

[RECHRGD]

Hey guys.. looks like I am getting small puddles of gas under the carb in the intake valleys.. anyone have any suggestions.. I was thinking my float level may need adjusting..

What kind of carb?  I noticed the same thing when I took apart the top end of my engine for a cam/head swap.  Mine is a Holley 750 DP that I had just installed a new Proform main body on.  The new main body is jetted larger than what was needed for the old cam/head combo, so I thought that may have been the cause.  Don't know though!  I'll be putting it back together soon and don't want a leaky carb on start up so I will be interested in any comments made.   Bob

[Ghoste]

Check those fuel lines too.  Do you have a fuel filter up there anywhere with rubber lines in and out and hose clamps holding them to the hard lines?

[Savage6]

hey guys.. just wanted to say thanks for the help.. i checked the air/fuel mixture on the carb and it was off... once i lowered the fuel level float and upped the air the leaking stopped... thanks again... Savage