Photos of 2072" of Mopar

[oldschool]

Here are photos of my cars, I'm using more than 1 post to show all.
They all have a 500" motor making 700+ hp & the blue car has a 572" motor that makes 800+ hp.

[oldschool]

And some more...
When I want to add 100 hp to my 572" motor I put on this dominator.

[oldschool]

Some more....

[oldschool]

Sorry they aren't cleaner, I'm too busy driving the hell out of them to stop and clean.

[oldschool]

One more...

[Just 6T9 CHGR]

Very nice collection you have there!

[The70RT]

 .....................

[firefighter3931]

Verrrry Nice !!!    And they're all 4 spd cars too 

That Dommy setup looks really tall....how big is your 6-pack scoop ? Can you run an aircleaner on it as well ?

I noticed you're an AED carb fan  How does the 1050/4500 drive on the street ? I noticed AED has a "pro-street" 4500 series 1050 that has adressed the usual low speed quirks that most guys complain about. 

The headers on that 70 are impressive....lots of custom work there, fabbing them to fit.

What are you running for transmissions and how do you manage to keep clutches from burning up in those badboys 



Thanks, Ron

[Blown70]

 

[badass]

Thats what I like.

[oldschool]

Verrrry Nice !!!    And they're all 4 spd cars too 

That Dommy setup looks really tall....how big is your 6-pack scoop ? Can you run an aircleaner on it as well ?

I noticed you're an AED carb fan  How does the 1050/4500 drive on the street ? I noticed AED has a "pro-street" 4500 series 1050 that has adressed the usual low speed quirks that most guys complain about. 

The headers on that 70 are impressive....lots of custom work there, fabbing them to fit.

What are you running for transmissions and how do you manage to keep clutches from burning up in those badboys 



Thanks, Ron

ron, i use a k/n flow control air cleaner. it has a big drop. it does fit under the hood with the 6 pack scoop.
i am a big fan of AED stuff.i have it on all the cars.the dominator you see is their( pro street) dominator. it drives,idles really nice. i never thought a dominator would work as well as this does. they put a powervalve on the primary side,so the idle is very clean.its also cnc,d to flow 1120 cfm so it makes killer power up top. they did their homework on this one!
the headers are 2-1/8 - 2-1/4 with a 4" collector.i took the car up to kooks in new york,and had them made for the car.they are awesome. they all are seperate pipes ,makes them very easy to put on or take off.
i use a 18 spline trans. in all of them. so far so good 
the clutch for all cars is a mclleod dual disc. i have been unable, so far, to tear one up. its the only clutch to hold up,that i have found

[firefighter3931]

Thanks, i was doing some reading on those AED Dominators and they sure sound nice....good to hear they perform as advertised. Not cheap though at $950 but heck if they work that good....definately worth it 

The Kooks headers are awesome !    I'm probably gonna go with the raised port step headers from TTI for mine.

Those 23 spline 833's sure are tough ! 



Ron

[racecharger]

Nice

Thats some great cars you have there!!   
That mush power with a dual plane intake is impressive

[Ghoste]

Your performance fleet is nothing short of amazing.  Each car is stylish and clean and the powertrains give up nothing.  I would be proud to have just one of them, congrats!   

[oldschool]

Your performance fleet is nothing short of amazing.  Each car is stylish and clean and the powertrains give up nothing.  I would be proud to have just one of them, congrats!   

thank you ghoste for the kind words,i appreciate it......

[acelondon]

ok, now me and my rusty 318 feel worthless. thanks.


BEAUTIFUL collection!
i hope to be there in ten years!