News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Valance corners

Started by NMike, January 08, 2008, 11:55:57 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

NMike

January 08, 2008, 11:55:57 PM
are they all made by one company, or are there different ones? i read about the less than stock fitting of a set of these.

daytonalo

#1
January 09, 2008, 12:03:24 AM
yes they need massaging to fit , after all , most of this aftermarket crap needs some tweaking

69bronzeT5

#2
January 09, 2008, 12:18:17 AM
What about the frame rails, they shouldnt need tweaking, would they? :shruggy:


I'm in the same boat as you Mike, I need valance corners, quarters, rear crossmember etc :rotz:
Feature Editor for Mopar Connection Magazine
http://moparconnectionmagazine.com/



1969 Charger: T5 Copper 383 Automatic
1970 Challenger R/T: FC7 Plum Crazy 440 Automatic
1970 GTO: Black 400 Ram Air III 4-Speed
1971 Charger Super Bee: GY3 Citron Yella 440 4-Speed
1972 Charger: FE5 Red 360 Automatic
1973 Charger Rallye: FY1 Top Banana 440 Automatic
1973 Plymouth Road Runner: FE5 Red 440 Automatic
1973 Plymouth Duster: FC7 Plum Crazy 318 Automatic

NMike

#3
January 09, 2008, 12:22:49 AM
i bought my valance corners years ago at a swap meet. i believe they are the ones that Charger Specialties sells. in fact i think i bought it from them at the swap meet. just don't want to waste alot of time fitting these ones, when i could buy better ones.
Print
Go Up Pages1
User actions