A/C Heater Switch Cable - where does it go?

[dvnen]

Trying to put back together heating/air controls on my 3rd generation a/c carr.  Can anyone tell me where the cable from the back of the heat/cold lever on the control panel go to? If possible does anyone have a diagram for this  Thanks

[Nacho-RT74]

71/72 or 73/74 ?

lever switch is diff, so does the plug, however colors are the same

here I give you 71/72... 73/74 basically the same:

Also since 72, blower and clutch ( green and blue ) got diff bulkhead cavities locations OR with a grommet on firewall ( depending on cavities available with equipment options )

[dvnen]

thanks for the reply...is there is a hard cable that attaches to the hot/cold arm on the back of the control panel - it looks think mine is cut off.  If so where would it attach to?  Also, do you have any diagrams showing where the vacum lines connect and lead to?  Thanks

[Nacho-RT74]

will search when arrive home tomorrow

[willille]

On my charger the hard control cable goes through the firewall, across the firewall and attaches to the heater water control valve on the passenger fender well.

[Nacho-RT74]

I cant find vacuum diagram. Will take pics to a buddy's mine car whe removed dash frame to some electrical repairs.

Have to take a pic of my car about the heater hard wire.

HOWEVER, i think Venezuelan vacuum hoses were set slight diff, since on HEATER, owners manual says air is routed to floor and windshield I think, and on my car is routed to front vents instead somewhere, I can't recall right now since never use heater. I can get something wrong thought