News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Electric Fan Wiring Help!!!

Started by Mopar Crazy, September 06, 2007, 09:09:42 PM

Previous topic - Next topic

Mopar Crazy

Need some help,  I have an electric fan with (2) leads. I want to wire it to a toggle switch.
I have a : (4) pole lighted rocker switch, (5) pole relay, and an in-line 30amp fuse.
Can some one give me a diagram or tell me what sequence these wires hook up????
The relay poles are marked, 30 85 86 87 and 87D in the center of the relay.
Thanks
Do it Once and Do it Right !!!

69chargeryeehaa

ok i'm not an atrist, but at least you can see how to hook it up.  You may have to make a additional wire for the light in the switch, which i would'nt be crazy about.  The way i just did my other electric fan now is attaching the + wire right to the battery with a fuse, then running the ground into the car (1 wire), to the switch, then the other pole of the switch to the chassis ground.  This way you only run 1 wire, and not 2, also if it does short out to ground the fan would just come on.  It's now my prefered method, just personal opinion.   :cheers:

Nacho-RT74

I hope this helps
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Mopar Crazy

Great info. Worked like a charm.......
Thanks for the help...... :2thumbs:
Do it Once and Do it Right !!!