'68 Satellite Roof skin replacement

[Charger-Bodie]

Be sure to wear a mask when wheeling that lead!

Yeah, you can fill the seams. Use Metal to Metal or any other aluminum based body filler.

[Harlow]

Thanks for the info guys. I don't think I'll wire wheel the other two pillars, it made WAY too much mess...I'll post some progress pics this weekend.

[Harlow]

Alright. Its still not tacked on. I've got a question for you guys. I know a guy that builds hot rods that lives right across the street from one of my friends. I went over and talked to him to see if he had a spot welder. He said he didn't but that he thought he could just mig weld it... What do you guys think of that? I guess he would just weld it across the seam along the drip rails and pillars... I'm gonna clamp the roof down and bring it over on saturday so he can take a look at it.

[The70RT]

Alright. Its still not tacked on. I've got a question for you guys. I know a guy that builds hot rods that lives right across the street from one of my friends. I went over and talked to him to see if he had a spot welder. He said he didn't but that he thought he could just mig weld it... What do you guys think of that? I guess he would just weld it across the seam along the drip rails and pillars... I'm gonna clamp the roof down and bring it over on saturday so he can take a look at it.

Most use a mig.

[AutoRust]

A MIG will be then adequate for what you are doing. Keep the heat range low, and move around from area to area to keep heat from building up.
Good Luck with your project.