70 coronet drum to disc brake swap from 75 a body

[no318]

Is this a workable swap?  What am I gonig to run into?  Thanks for any help. 

[Shakey]

Is this a workable swap?  What am I gonig to run into?  Thanks for any help. 

Start using the search feature.  There are a lot of threads on this swap that will have all the answers you are looking for and some that you may not of even thought of.

I did this swap on my '69.

[bandit67]

318, Mopar Noob here, with plans to do the same swap. I stripped a 76 Royal Monico of everything with plans to install the setup on my 71 Charger. From what info I have found , says that everything Will bolt on.  BUT, do not use the spindles.  I think the Monico is a C body and C body spindles will cause incorrect supenstion action.  Not sure what that means other than it Will handle pretty crappy.   I plan to use new lowed spindles.   Any one know if this is correct.............J

[Back N Black]

I did the swap for my 69 Charger.This is what i used 76 A body spindles (same deal).All the parts of a 1985 Fifth Avenue ie....calipers.rotors,bearngs,seals,brake pads.Execpt for the flex hoses,they are of a 73 Roadrunner.

Part #
Caliper A1 Cardone    18-4145
Caliper A1 Cardone    18-4144
Hub & Rotor Wagner BD60463 X 2
Inner Bearings  Federal-Mogul L68149 X2
Outer Bearings Federal-Mogul LM11949
Seal  Federal-Mogul 5121 X 2
Brake pads Wagner MX84 (mx7017)
Flex lines Wagner F99069 or BrakeBest Bh99069 (73 RoadRunner)  Hope this helps.......

[bull]

Have you read this: http://www.moparaction.com/Tech/archive/disc-main.html