69 Dodge Daytona Nose clearances

[coryg]

Hello, I am new to this board.  Right now I have a 69 Dodge Daytona at the body shop as I am having the original metal nose put back on the car as someone put a fiberglass nose on during its lifetime.  The body guy asked me to try to track down the factory clearances (Spacing) between the nose and fender.  Does anyone on here know this?  I spent half the day trying to track it down with no luck.  Any help would be GREATLY appreciated.  Thanks
-Cory

[daytonalo]

Do you have the correct fender to nose seals ? Just bring nose back to around 1/2 -3/4 gap and tighten when seal looks and fits well . Keep in mind they fit like shit when they left Creative ind . I think they used Jerry's kids to install when new .  Is the fiberglass nose for sale ? Larry

[coryg]

Does the nose step inward a bit from the sides, or does it sit flush? 
-Cory

[Aero426]

1/2" gap is too narrow.   Closer to one inch is what you want.   I can meaure mine.  The nose sits flush with the fenders.     

[Aero426]

Just measured my car and it is pretty much a 3/4" gap.   plus or minus 1/8" from there and you are 'bout right.