News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

driveshaft question

Started by chargerman68, April 17, 2007, 10:37:41 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

chargerman68

April 17, 2007, 10:37:41 PM
have what i think is a 440/727 8 3/4 driveshaft.the problem is not the length if fits in there fine with a little help.the problem is the u joint is too big for the rear end yoke.any ideas or some measurements to bounce off of.thanks
1968 CHARGER R/T CLONELOOKING FOR ANOTHER PROJECT 69-70 CHARGER SHELL

RD

#1
April 17, 2007, 11:00:49 PM
u need a combo u joint... part number 347 Precision.
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

chargerman68

#2
April 17, 2007, 11:37:01 PM
any ideas on where to buy one cheap.thanks for the help
1968 CHARGER R/T CLONELOOKING FOR ANOTHER PROJECT 69-70 CHARGER SHELL

RD

#3
April 17, 2007, 11:47:00 PM
Quote from: chargerman68 on April 17, 2007, 11:37:01 PM
any ideas on where to buy one cheap.thanks for the help

they usually run around 25-35 dollars.  you can find them at O'Reilly Auto Parts or NAPA or Advanced Auto
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

Just 6T9 CHGR

#4
April 18, 2007, 08:04:38 AM
Chris' '69 Charger R/T

Print
Go Up Pages1
User actions