Mancini Racing alternator upgrade opinions?

[timinator]

Has anybody tried this kit from Mancini racing? It seems like a good setup but just wanted opinions of anybody out there who has tried it. Does it come with instructions how to wire it to my existing system?

http://chucker54.stores.yahoo.net/delialbrpk.html

[mikepmcs]

I haven't tried it but if you do a search on here, I remember you can do this for a lot cheaper with off the shelf stuff from newer vehicles.  Worst case, you'll have to buy the bracket from them.

my.02

v/r
Mike

[dkn1997]

I haven't tried it but if you do a search on here, I remember you can do this for a lot cheaper with off the shelf stuff from newer vehicles.  Worst case, you'll have to buy the bracket from them.

my.02

v/r
Mike

word..

http://www.moparchat.com/forums/showthread.php?t=61642

[doctorpimp]

That bracket is the AR Engineering small Denso alt bracket.  It's for Toyota 4Runner 60 Amp Internally regulated alts.  The 85-89 ones for 4 cyls come with a v belt pulley already installed.  It's smaller, lighter and more amps at idle than the Mopar one.
http://www.arengineering.com/alternatorbracket/ND_bracket/denso.html

It's different than the modern V8 mopar Denso 90 Amp alt bracket - you can use the factory bracket.