wiper harness and foward light harness

[autodynamics]

i ordered a replacemnt harness from year one for my foward light and wiper harnesses. well there not exatly the same meaning there are some empty spot in the connector that after looking at my originals are taken up by some wires, seems like i have to transfer them. well any of you guys seen this before? the place im refering to is the bulk head. the wiper harness is the same as well. these harneses are for a small block , not that i think it should make a differnce. any suggestion?

[Shakey]

Possible they sent the wrong ones?   

It happened to me and they said keep it, and then sent me the correct one.

[autodynamics]

really!!!

[Shakey]

Yeah!

When I asked for an underdash wiring harness for my '69 I got a forward headlight harness for a '71.  It was simply received wrong at YO.  The two part numbers are very similar so I can see how it happened.

Anyways, they had said not to bother sending it back and then sent out the proper one.

Also, if you have a 2 speed wiper motor, you will need the seperate wiper motor harness.  If you have a 3 speed wiper motor, the harness is part of the wiper motor.

[autodynamics]

i have a two speed motor so i guess i have to do a little work ...thanks

[tan top]

on my 69 i had to  swap over  the blue & green wires for the A/C  that are fitted in the wiper harness plug , the new harness from
M&H that year one sells , only have the standard wiring ,no  optional accessory wiring

[autodynamics]

SO I GUESS I HAVE TO DO SOME WORK ON THE HARNESS. MINE HAS A/C ALSO THATS WHAT I HAVE TO MOVE OVER... AS WELL

[gtboz69]

   for your ac wires go and buy some terminals that has the male spade like car quest# ta508 .thats what i did