New style mini-starter.

[Charger_Fan]

I found this site while surfing today; http://www.robbmcperformance.com/products/hemi_starter.html



Smaller, lighter & more powerful than the usual suspects, aaaand they're made in the USA!

[myk]

Sounds great, but they only work on cars with manual transmissions?

[Chryco Psycho]

you can use the production Magnum starter availble off any newer Dodoge truck V 8 , you will need to remove the adapter block where the battery cable hooks up to fit the big block

[Charger_Fan]

Sounds great, but they only work on cars with manual transmissions?

I didn't notice that. Now the link seems to be dead.

[RallyeMike]

I splurged for once and put one on the Road Car. It's a very, very nice piece and cranks the motor like nothin to it. One of the housing bolts did hit my Hooker Super Comps so it took the slightest dimple to clear. 

[RobbMc]

The starter shown above is only for 1966-69 426 Hemi 4 speed cars. These cars used a unique starter unlike other Mopars.

RobbMc also makes a starter to replace the standard Mopar starter:

http://www.robbmcperformance.com/products/mopar_starter.html

Here is some general info about RobbMc starters:

http://www.robbmcperformance.com/products/starter_home.html

Note that the Dodge Magnum starter mentioned above is a NipponDenso type starter.

[Chryco Psycho]

yours looks liek a nice piece being a bit smaller & more powerful too  not that i have problems with ND starters

[Charger_Fan]

Thanks for the additional info on those starters. I've definitely got one on my 'to buy' list.

[RobbMc]

Thanks Charger Fan.

As a side note, Sam at TTI headers is now recommending our starter because it provides more clearance with their headers than the ND starter. Many of their big tube headers will only work with a 130 tooth flywheel if you are using a stock or ND starter where you can use a 143 or 130 tooth with our starter.