News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Kickdown linkage.. 2- or 3-piece..?

Started by T16, September 26, 2006, 02:10:17 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

T16

September 26, 2006, 02:10:17 PM
Looking on eBay I´ve found two kinds of kickdown linkage.. one with 2 rods and one with 3 rods..

Can both be used on a ´69 383 engine..? Not going for original look..

Thank you

dodge freak

#1
September 26, 2006, 04:19:33 PM
Well think about using a cable then. Its neater and more easy to adjust and you can buy all brand new from Jegs or Summitt Racing. Lokar is the brand name.

PS I have a manual valve body so no cable or rod I need.

John_Kunkel

#2
September 26, 2006, 05:18:47 PM
Either the 2-rod or 3-rod will work as long as all of the pieces are matched but the 3-rod is more authentic looking.

The upper pic below is the correct '69 setup:
Pardon me but my karma just ran over your dogma.
Print
Go Up Pages1
User actions