News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Need help 69 front to rear speaker fade switch install

Started by A34, September 01, 2007, 01:14:06 PM

Previous topic - Next topic

A34

Hey Guys,

My Charger originally had a am/fm radio with a front to rear speaker control switch.

It was missing when I got the car. I have found the radio and until today, what I thought was a complete harness. I found a harness with with bezel and it has 3 connectors that I'm not sure where they go.

Would someone mind looking at the attached pic and telling me where the 3 connectors go, and what else I'm missing here to connect to my back speaker?

Also, which side of the car did the speaker mount to? I was thinking maybe the drivers side of the package tray.

Could also use a pic and measurements on where to install the bezel under the dash. Mine has so many holes in it, I'm not sure where to mount the bezel.

Part number on tag is 2926097.

If you want to be a kind soul and call me on my cell, I'll be in the garage trying to get the carpet in it for awhile. Cell - 404-643-5755.

Thanks for any help !!!

Looking for NOS parts for 69 Charger - whatcha got?
God Bless America, Our Troops and Their Families !
Deo Vindice

Nacho-RT74

I can't see it clear, but I can say for the obvious male conector there is to plug on female speaker output on radio... female plugs are to every speaker.

Does look that harness/fader setup is for stereos Radios. Are you sure your radio is Stereo ?

3rd gens are diff since Fader/Balance on STEREOS setups are on Radio itself but for what I see on that harness does look that setup is for double rear speaker, where harness section with female plug with green wire is left channel on front speaker, and female plug where there is violet and green should be conected on a rear harness running untill trunk trhought dirver side floor.

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

A34

Quote from: Nacho-RT74 on September 02, 2007, 12:44:15 PM
I can't see it clear, but I can say for the obvious male conector there is to plug on female speaker output on radio... female plugs are to every speaker.

Does look that harness/fader setup is for stereos Radios. Are you sure your radio is Stereo ?

3rd gens are diff since Fader/Balance on STEREOS setups are on Radio itself but for what I see on that harness does look that setup is for double rear speaker, where harness section with female plug with green wire is left channel on front speaker, and female plug where there is violet and green should be conected on a rear harness running untill trunk trhought dirver side floor.



Thanks, I have since learned this is for a stereo application and mine is a mono am/fm. So, I guess I need to find the right harness.  :brickwall:


Looking for NOS parts for 69 Charger - whatcha got?
God Bless America, Our Troops and Their Families !
Deo Vindice


A34

Looking for NOS parts for 69 Charger - whatcha got?
God Bless America, Our Troops and Their Families !
Deo Vindice

Nacho-RT74

Sure you'll need to rebuild the harness, but you are getting the hardest parts there... knobs, pots and plugs ;)
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html