68 trunk/jack question

[runningman]

I posted this same stuff over in the parts wanted area also.  I am replacing all the trunk sheetmetal and am missing the jack and whatever was supposed to be there to hold it.  I have a jack that came with the car but the hook doesn't look the same.  So does anyone have pics of what I need to have on the trunk filler panel?  and does anyone have any of these parts or jack they are willing to part with?  thanks  matt

[tan top]

the  jack  hold down bracket  & spring eye , are available from the paddock , not cheap though . there is a  picture  of these bits on their web site

[runningman]

I have the bracket that is mounted on the outer wheelhouse but that is it.  I will check out the paddock site and see what they have.  I am also going to need the spare tire hold down bracket and whatever else is needed for that.  thanks  matt

[8WHEELER]

Do you need these brackets? I have not seen them for sale repop, but thats good to know.

Dan

[runningman]

Yeah that is the stuff I need, along with the spare tire stuff.  I am going to pick up the round looking ones from the paddock, although they are $50 for the pair   Where does the one go for the jack handle??  thanks alot  matt

[BigBlockSam]

i need those parts too.

[8WHEELER]

Yeah that is the stuff I need, along with the spare tire stuff.  I am going to pick up the round looking ones from the paddock, although they are $50 for the pair   Where does the one go for the jack handle??  thanks alot  matt

The jack handle goes through the loop on the right side of that picture, then the spring hooks onto the
loop handle to hold it all in place. I hook the spring around the handle itself.

Dan

[tan top]

you can get new a  jackhandle / lug wrench  from  . year one  ,paddock , Jim's + any dodge dealer i would of thought as it is a new Chrysler part . hope this helps

[runningman]

Thanks for the pics and info, is there one round hangar or two there?  Kind of hard to tell from the pics.   thanks  matt

[tan top]

one hold down loop & one rear jack hold down bracket .