Rear window trim

[Mrfixit]

Hey all, another quick question about the back glass area for the 2nd gen charger. The clips that hold the rear window trim on, do they have to be installed before the glass goes in  or can they be done with the glass in place? And while i'm on this topic, the factory used a urethane to affix the glass? Thanks for the help

[tan top]

fit the clips before you fit the glass . the rear glass was originally stuck in place  with butyl tape . but windshield glue for stuck in glass would work. just use spacers to keep the glass in possion ,untill the glue sets.

[Mrfixit]

Thanks for the reply . sounds good. When i took the glass out, the remnants of whatever was holding it in werent really recognisable anymore. And the clips nearly all gone. I'll definately put the glass back in with butyl tape then, cheaper and probably easier to work with. That will probably be put on the back burner for now, with the glass out it's a lot more convienent to get to the package tray area, wich needs attention due to the water coming in around the glass. Cause and effect every where with these things.      later