RARE 1969 Dodge Charger Press Release pic and info

[69_500]

Would someone please explain why in 1969 you couldn't get a HEMI in a Charger RT/SE?

[tan top]

 

Would someone please explain why in 1969 you couldn't get a HEMI in a Charger RT/SE?

              thought that also           

[Gilbert Charger]

That is a neat item to have,Thanks for sharing it.I wonder if anyone has that on a 68 Model?

[Brock Samson]

if i find any more i'll post em..

[694spdRT]

It sure looks like a '68 dash pad and it appears the door locks are strangely absent or am I blind? Could it be because they used a '68 model and the doors were not yet changed? Maybe the locks were left off because the literature specifically calls them out and some buyers may have caught it?

I see the front reflectors don't appear to be the yellow/orange colored type either.

[Ghoste]

I agree.  It looks to be no locks and red reflectors.

[tan top]

been  looking at a  larger picture of the one in color   , i know it has been said before hear  ,that is defiantly HEMI trans cooler lines showing at the bottom of the front valance.

[resq302]

been  looking at a  larger picture of the one in color   , i know it has been said before hear  ,that is defiantly HEMI trans cooler lines showing at the bottom of the front valance.

Am I that blind or am I just not seeing the trans cooler lines?

[tan top]

been  looking at a  larger picture of the one in color   , i know it has been said before hear  ,that is defiantly HEMI trans cooler lines showing at the bottom of the front valance.

Am I that blind or am I just not seeing the trans cooler lines?

 
                      no  you are not  blind , that colored picture is not that clear , the picture i have got is slightly larger and clearer
           i have arrowed the picture that ( Brock Sampson) posted

[Just 6T9 CHGR]

On a Hemi with an auto car, you wouldnt see any lines hanging down below the valance.

The cooler mounts in front of the radiator but the lines connecting to it run on top of the radiator yoke.

The bottom lines tuck under the rad support just like the non-hemi cars..

[Ghoste]

What if it were a hastily assembled trim buck?

[694spdRT]

What if it were a hastily assembled trim buck?

Realisticly, if they never opened the hood it wouldn't even need to have a Hemi. There are just a couple badges seperating that car from any other.

[Ghoste]

Which may explain why it's never been found.  It could very well be out there right now with a 383 underhood and no one knows what it is.

[tan top]

On a Hemi with an auto car, you wouldnt see any lines hanging down below the valance.

The cooler mounts in front of the radiator but the lines connecting to it run on top of the radiator yoke.

The bottom lines tuck under the rad support just like the non-hemi cars..

     
                      i can appreciate what you guys are saying , and  i would probably be saying the same my self , but i can clearly see the  brass union( connector) and about 4"s of the line and a bit of the bend left of the union & about 1" on the right.