Arrow Emblem on 68 grille

[68mmcharger]

Is the arrow emblem on the front grille on a 68 different from the one on the rear panel?  My XP has an R/T emblem on the front. Want to take it back to original.

Does anyone sell a reproduction piece?

Thanks....Kevin

[Charger-Bodie]

yes they are differant the tail panel enblems are angled and the grille emblem is flat.

[68mmcharger]

Ok. Thanks.

I picked up a new rear arrow from Firestone Collectables but can't find a source for the front one.

[68mmcharger]

Any sources for front arrow emblem??

[keepat]

Check with YearOne http://www.yearone.com/serverfiles/fbshopmain2.asp?cat=1
Pat

[B5 Charger]

I ran into the same problem with my '69.  I ordered a reproduction from Year One but found that it mounted with two pins and did not use any screws as the orginals did.  I ended up buying an NOS emblem off ebay.  I think I still have the year one emblem somewhere.  Nice piece except it didn't mount as original.

[UFO]

B5 charger, sounds like they sent you a 68 emblem instead of the 69.
Some of the repo stuff still has the part number moulded into the back side.

[B5 Charger]

At the time I ordered it they claimed it was the same for both.  That has been a few years ago so maybe they have since corrected the problem.  Either way I have a good NOS piece now.  I can't find the Year One piece anywhere I must have given it to somebody.

[BrokenHero]

just got mine from year one. I think i can install it but lifting of headlight door, but does anyone know which way these little backing pieces go or have any tips?

[BrokenHero]

Spent a few hours tonight trying to get this arrow emblem in the headlight door but couldn't pull it off.

I took off the headlight bezel, not the headlights, and could get the self tapping nuts/rivets behind the posts but couldn't get them to stick.

Frustrating. If anyone has any tips please let me know!
Thanks

[BrokenHero]

These pal nut rivet things suck.