69 Charger drip rail replacement

[mopar4don]

I am replacing my roof skin with a skin from a donor car and am replacing the drip rails with new ones from AMD.
Has anyone put these on?
Is there anything to it?
Maybe positioning to the front A-pillar drip rail?
There is a gap but the trim should cover it right?

Thanks
Don

[Eldovert]

Don,
If you haven't checked out Chris Birdsongs youtube channel now is a good time.He is replacing a roof and driprails on a sun roof car.

https://www.youtube.com/channel/UCYGXns0Ezqd-qKyxMjH-7Pg/videos

Cheers,Pat

[AKcharger]

I do not envy you!
Good luck!

[mopar4don]

Don,
If you haven't checked out Chris Birdsongs youtube channel now is a good time.He is replacing a roof and driprails on a sun roof car.

https://www.youtube.com/channel/UCYGXns0Ezqd-qKyxMjH-7Pg/videos

Cheers,Pat

Thanks Pat, Cris's videos did help a bit, but also raised another question.
How does the quarter overlap the drip rail, or does it get trimmed to fit?

I do not envy you!
Good luck!

I am not looking forward to this either, but it's not getting done by itself!

[Eldovert]

Hi Don,
Here is some pics from the inside and outside of a B body (pass side) driprail.
Cheers,Pat

[mopar4don]

kinda hard to tell from the pics what I am looking at.
I know its the drip rail at the end closest to the quarter, after that I'm not sure what to make of it?

[Eldovert]

Don,
What you are looking at is three different pieces..roof skin, drip rail and a small portion of quarter?
roof skin overlaps this small piece and the drip rail covers it from the bottom