Charger Air Grabber Hood Pin Measurements

[parkerswede]

Would someone who has an air grabber hood on a 1971 and 1972 Charger please measure the distance from the front of the hood to the front of the hood pins? I am curious how far back they are.Thanks.

[Drop Top]

Are you going to install a set on your hood? If so, its best to install the pins first and then use that to find out were the holes in the hood need to go. If you need further instructions let me/us know. I have installed many factory hood pins in these cars over the years. If you go off of someone elses meausurements. They may not be just right for your car. It can very up to 1/4'' in any direction.

[parkerswede]

Have an air grabber hood with hood pins already installed. There was some question about the dimensions. Just wanted to know what proper measurements should be. Thanks.

[694spdRT]

I will get some measurements off my dad's '71 and post them.

[parkerswede]

Any news of hood pin measurement yet?

[694spdRT]

Sorry,

I havn't been to the shop yet. I will try to get them tommorow and post them up.

[jeepee]

Can i also know what measurements they have?
Jp