News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

AMD Quarter Panel Skins

Started by geffen928, April 11, 2020, 06:20:07 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

geffen928

April 11, 2020, 06:20:07 PM
Evening Gents.......I took a look at my AMD 1/4 panel skins.   I looks like the long front to rear body line has a bit of an arch to it.  My guess would be that this is quite normal for replacement sheet metal.   I'm pretty sure this line was dead level from the factory.  How have you folks addressed this issue??

Best,

Geffen

cdr

#1
April 11, 2020, 09:00:44 PM
The line is not arrow strait .
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Mike DC

#2
April 11, 2020, 11:22:48 PM
 
Pics? 

Nacho-RT74

#3
April 12, 2020, 03:27:23 AM
Year?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

geffen928

#4
April 12, 2020, 09:12:36 AM
Sorry.....My car is a '69.   No pics but the body line has about a 3/4 rise over it's entire length.  I laid a straight edge over the panel.  The body line at the door jamb and tail panel seem to be the same height.  The 3/4 rise is most prominent directly over the rear wheel opening.  Thoughts??

Geffen

cdr

#5
April 12, 2020, 01:34:06 PM
Quote from: geffen928 on April 12, 2020, 09:12:36 AM
Sorry.....My car is a '69.   No pics but the body line has about a 3/4 rise over it's entire length.  I laid a straight edge over the panel.  The body line at the door jamb and tail panel seem to be the same height.  The 3/4 rise is most prominent directly over the rear wheel opening.  Thoughts??

Geffen

Yep that is correct
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr
Print
Go Up Pages1
User actions