Which way does this go in

[john108]

1968 Charger
Tank Fill Line Seal.
Service Manual Picture TOO Small to see.

In the picture, Is it pointing in the right direction??

[john108]

I Found an Example.  I believe it is shown Correct.
Thank You.

Now How to lube and squish it in. Going out to try now.

DONE - Easier than I thought.

I Hope my Pictures Helps someone.
John

[John_Kunkel]

K-Y Jelly is an excellent lubricant for assembling rubber parts. Silicone grease works well, too.

[Charger-Bodie]

solvent based wax and grease remover is the best lube for rubber.

[Bronzedodge]

That seal look odd - asymetrical to the original ones I have here.  Never seen the bulge on the left of the pic.  It looks a bit rough too - cracks in the groove?  that being said, the new one I had here was really stiff vs the original one out of the tank, to the point that I had gloves on and in the trunk, pushing hard and I'm not a skinny guy.  I ended up using my original.