Bumper Bolts

[sstcuda]

I had both my front and rear bumpers rechromed for my 68', they look great with one exception. The new bolts look so out of place against the new chrome, so I was wondering does anyone sell better bumper bolts and if so who. The ones I have I bought at Carlisle don't remember who I got them from but it was a mopar reseller.
Thanks

[cdr]

Polish the new bolts, the head is stainless steel.

[Charger-Bodie]

I like to use chromed carriage bolts. I find them on eBay

[Nacho-RT74]

originals are zinc cadmium platted and capped with SS cap... I think those looks better than chromed.

Nuts should be with captive washer, but they are harder to come by

HOWEVER:

https://www.ebay.com/itm/Mopar-Bumper-Bolt-Nut-Plymouth-Dodge-B-Body-Satellite-Charger-GTX-Road-Runner/323273384450?epid=1223384660&hash=item4b44986202:g:kxgAAOSwySlZ7gyj

[Nacho-RT74]

BUT, definitelly cheaper without the correct nut:

https://www.ebay.com/itm/16-pack-Mopar-bumper-bolts-nuts-locks-flat-washers-stainless-capped/192370247061?hash=item2cca290595:g:8BMAAOSwzXxaEy6q

[Nacho-RT74]

and searching further sometimes can be found something like this:

https://www.ebay.com/itm/Mopar-stainless-capped-zinc-bumper-bolt-black-phosphate-nut-3-8-16-x-1-bolts/202120245651?hash=item2f0f4e3193:g:208AAOSwldRaEy92

I guess we can guess now where rehrenberg gets them LOL

[CDN72SE]

These are what I used https://www.ebay.com/itm/NOS-Mopar-Bumper-Bolts-Black-Phosphate-Nuts-Cuda-Charger-Duster-R-T-Coronet/323274838285?hash=item4b44ae910d:g:B34AAOxyCepScGt3 NOS from Rick Ehrenberg.

[Nacho-RT74]

I posted those ( 1st link ) sold by piece by Rick Ehrenberg, and if you look at the 3rd link, will notice a cheaper source LOL.

Sometimes the NOS therm can be a bit of manipulation if you ask me.

[gtx6970]

I'm not 100% sure the nuts with a captive washer are correct

btw, the most correct bumper bolts I've found came from Auveco

[CDN72SE]

I'm not 100% sure the nuts with a captive washer are correct

Agreed about the nuts and captive washers but the bolts at least matched the original ones on my 72.

[Charger-Bodie]

The auveco bolts are nice but they are in bulk and usually beat up . So I always sift thru them to find some to polish up. Chrome ones just look better to me.

[Nacho-RT74]

I'm not 100% sure the nuts with a captive washer are correct

btw, the most correct bumper bolts I've found came from Auveco

Is a fact my car came with captive washer nuts ( I was the first person on remove them ). What I can recall is if were black phosphat really. I'm toward to think they were zinc plated

[VegasCharger]

Nacho, 3rd link one isn't cheaper. Look at the shipping cost lol.

[Nacho-RT74]

Nacho, 3rd link one isn't cheaper. Look at the shipping cost lol.

well I guess will be the same getting all bolt set LOL... I think our cars require 12 or so ? that adds around $0.6 by bolt/nut piece

[Nacho-RT74]

and:

[VegasCharger]

and:

Much better deal. 12 bolts shipped = $24.95

This link (your 3rd), 12 bolts shipped = $101.40
https://www.ebay.com/itm/Mopar-stainless-capped-zinc-bumper-bolt-black-phosphate-nut-3-8-16-x-1-bolts/202120245651?hash=item2f0f4e3193:g:208AAOSwldRaEy92

That's over 75% savings.

[Nacho-RT74]

Hey no! I used the 3rd link to make the cart! Note the seller

Shipping cost remains the same buying 1 than 12