News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Seal for brake booster rod?

Started by INTMD8, February 28, 2018, 10:24:09 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

INTMD8

February 28, 2018, 10:24:09 AM
Maybe I'm searching for the wrong term but so far no luck in finding what seal I need for the brake rod from pedal to booster. Is there supposed to be a rubber boot here or something else? Thanks!

69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 595rwhp 475rwtq

Obi Ben Dover

#1
March 04, 2018, 07:01:51 PM
These pics don't show it very well but there is a boot in there.  Jim

INTMD8

#2
May 14, 2018, 07:04:08 PM
Ok I bought a plate that I thought was needed for the rubber boot but the bolt pattern is much bigger than what bolts to the firewall.

Any ideas on what I need here? Thanks.


69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 595rwhp 475rwtq

Just 6T9 CHGR

#3
May 15, 2018, 05:41:43 PM
That plate is for manual brakes.....this is the power brake plate....
Chris' '69 Charger R/T

Just 6T9 CHGR

#4
May 15, 2018, 05:43:29 PM
This is the correct rubber boot off the Bendix Booster (along with the plate mounted and firewall gasket)
Chris' '69 Charger R/T

INTMD8

#5
May 15, 2018, 07:44:25 PM
Ok I see that's an oem setup, any idea what's on my car?
69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 595rwhp 475rwtq

70sixpkrt

#6
May 15, 2018, 08:00:16 PM
Some of the master cylinders don't have the holes for the screws where the rubber boot attaches.


440-6pk, 4-speed, Dana 60 with 3:54  
13.01 @107.93 (street tires spinning all the way down)
Print
Go Up Pages1
User actions