leaf spring front mount

[nchrome]

Hy guys l'm new here and am in the process of replacing my frame rails and found  that the front spring mount is just about a total mess   Need to replace  it bud cann't  find any on line to replace it with   Any suggestions like maybe weld a plate in there to beef up the area  ore do any of you guys know where l can get some new ones? l've gotten most of my stuff from Carid Co.  But they don't list any   HELP   

[Lennard]

Check www.p-s-t.com. I know they have them for $89 a set and also reinforcement plates for $39 a set. They don't have part numbers,  or I would have given those. 

[nchrome]

just checked and didn't find anything Guess l'll try fansenall to replace the bolts and reuse the ones l have.  Just figured some where out there would be a set l could buy.

[WHITE AND RED 69]

These what you are looking for?

http://www.firmfeel.com/b_body_mopar_leaf_spring_hangers.html

[VegasCharger]

I have a pair, never installed with shelf wear.

$40.00 (pair) + shipping.

I also have a pair of OEM bolts/nuts. Thoroughly cleaned, threads are good.

$20.00 (pair) (not pictured but get one).

[garner7555]

I think you are looking for the structure of the car that the brackets shown above would bolt to?   If so, you could build that new from some flat plate with holes pre-drilled in the correct locations.  That is, if you don't mind it not looking oem.   

[68RT440]

Are these what you're looking for?

http://www.autometaldirect.com/suspension-brakes-leaf-spring-mounts-c-33_184.html