News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Turn signal switch

Started by charger_mike75, January 11, 2018, 05:53:50 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

charger_mike75

January 11, 2018, 05:53:50 PM
I have been looking for a 70-74 turn signal switch with the roller contact on it, does anyone know if they are still made or available anywhere?
The only ones that I find have a copper post that when i turn the steering wheel it makes a god awful squealing noise.

Nacho-RT74

#1
January 11, 2018, 08:54:17 PM
Just NOS...  and as far I can tell Maybe some OLD replacement pieces could still get the roller. Rest are the actual bronze push pin
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

randy73

#2
January 12, 2018, 10:12:05 AM
They are still made and they are everywhere, you can find oem or am. I got mine off ebay.

303 Mopar

#3
January 12, 2018, 11:52:34 AM
Quote from: randy73 on January 12, 2018, 10:12:05 AM
They are still made and they are everywhere, you can find oem or am. I got mine off ebay.

I even think NAPA has them.....
1968 Charger - 1970 Cuda - 1969 Sport Satellite Convertible

Nacho-RT74

#4
January 12, 2018, 01:45:59 PM
with roller on the tip?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

charger_mike75

#5
January 12, 2018, 08:02:14 PM
i havent seen any with the roller at all, just the pin. Are you supposed to use some grease or something with the pin? I guess i'm just going to have to keep looking, thanks for the replies guys.

Pete in NH

#6
January 13, 2018, 07:35:48 AM
Hi,

Yes, as I recall there should be a thin film of grease on the mating copper ring.

Nacho-RT74

#7
January 13, 2018, 07:52:59 AM
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Nacho-RT74

#8
January 13, 2018, 08:05:50 AM
Just in case, the original PN is 3488804, which ORIGINALLY didn't get the extra harness for cornering lights. The one with that harness was originally 3488805, but NOW all original replacements available are under 3488804 PN with the cornering lights setup. You simply wouldn' use it.

( I got luck maybe 7 or 8 years ago that I found the correct 3488804 one NOS for $45 or so on ebay )
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

charger_mike75

#10
January 16, 2018, 05:00:01 PM
I've got an original one from a 74 dart with part #3488804 and its in usable condition, I was hoping they made new ones with the roller instead of the pin. i'm assuming you would use a dielectric grease on the copper ring on the steering wheel?
Print
Go Up Pages1
User actions