News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Can you identify this shield ?

Started by chargernut69, May 02, 2019, 10:39:51 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

chargernut69

May 02, 2019, 10:39:51 AM
Well, I'm finally back to restoring my '69 Charger R/T clone and trying to remember what parts are what.

So I found this shield I had repainted with Chassis Black, but can't remember what it is for...  :o

Can you identify it please ?    Thanks.     There is a number of "3WL50" or "SWL50" marked on it....

BLK 68 R/T

#1
May 02, 2019, 01:33:50 PM
I think it's this?

chargernut69

#2
May 02, 2019, 01:42:32 PM
Ahhhh...   looks like the metal piece that the headlight splash shield clips to.     Thanks for the help. 

I only found one...   guess I need to check through my parts bin again.  :-\

green69rt

#3
May 02, 2019, 06:42:06 PM
picture of it installed.  Fender upside down.

BLK 68 R/T

#4
May 02, 2019, 09:48:21 PM
There you have it.

Just 6T9 CHGR

#5
May 03, 2019, 05:17:04 PM
Hmm....that doesn't look like the piece you are referring to.  That piece is actually part of the fender & not removable....
Cant recall where that piece you have pictured might be on a '69  :shruggy:

Chris' '69 Charger R/T

A383Wing

#6
May 03, 2019, 05:28:46 PM
Isn't is the protective shield on the drivers side frame rail to stop snow & slush from packing into the auto trans linkage?

Bryan

Just 6T9 CHGR

#7
May 03, 2019, 05:38:56 PM
Quote from: A383Wing on May 03, 2019, 05:28:46 PM
Isn't is the protective shield on the drivers side frame rail to stop snow & slush from packing into the auto trans linkage?

Bryan

Nah thats this....

Chris' '69 Charger R/T

green69rt

#8
May 03, 2019, 11:30:14 PM
The piece that the OP shows is actually spot welded to the inside of the fender.  I just used screws and the gaskets to hold mine in place.

chargernut69

#9
May 04, 2019, 06:31:10 PM
Quote from: green69rt on May 02, 2019, 06:42:06 PM
picture of it installed.  Fender upside down.


Ok, thanks....  Is there one on both fenders ?

Can't seem to find a 2nd one in my parts boxes.

green69rt

#10
May 05, 2019, 08:19:56 AM
Quote from: chargernut69 on May 04, 2019, 06:31:10 PM
Quote from: green69rt on May 02, 2019, 06:42:06 PM
picture of it installed.  Fender upside down.


Ok, thanks....  Is there one on both fenders ?

Can't seem to find a 2nd one in my parts boxes.

Yeap, mirror images.

gtx6970

#11
May 06, 2019, 10:27:40 PM
Forward upper inner fender splash shield as mentioned.

Original its screwed in place, repop fenders its welded in place

green69rt

#12
May 07, 2019, 08:01:06 AM
Quote from: gtx6970 on May 06, 2019, 10:27:40 PM
Forward upper inner fender splash shield as mentioned.

Original its screwed in place, repop fenders its welded in place

Yes, I forgot that.  AMD tack welds them in for shipping.

chargernut69

#13
May 07, 2019, 11:11:35 AM
Quote from: green69rt on May 07, 2019, 08:01:06 AM
Quote from: gtx6970 on May 06, 2019, 10:27:40 PM
Forward upper inner fender splash shield as mentioned.

Original its screwed in place, repop fenders its welded in place

Yes, I forgot that.  AMD tack welds them in for shipping.

Ok, Mitch, gtx6970..  thanks.       

I sent a message to AMD, and they told me that the shields are only sold with the fenders....   I was hoping it would be a separate part.

I'll keep my eyes pealed on eBay, or make up my own for the missing one.   It's a pretty simple bend...

green69rt

#14
May 07, 2019, 02:41:36 PM
It looks like you have the driver side shield.  Please confirm.  I have an extra pass side shield if you want it.  Picture attached.  Only surface rust and under coating.

chargernut69

#15
May 08, 2019, 09:04:38 AM
Quote from: green69rt on May 07, 2019, 02:41:36 PM
It looks like you have the driver side shield.  Please confirm.  I have an extra pass side shield if you want it.  Picture attached.  Only surface rust and under coating.

Yes, that would be great !   :)   Send me an email ( chargernut69@yahoo.com )  and we can sort out details for payment/shipping ...    Thanks.

green69rt

#16
May 08, 2019, 10:00:05 AM
Quote from: chargernut69 on May 08, 2019, 09:04:38 AM
Quote from: green69rt on May 07, 2019, 02:41:36 PM
It looks like you have the driver side shield.  Please confirm.  I have an extra pass side shield if you want it.  Picture attached.  Only surface rust and under coating.

Yes, that would be great !   :)   Send me an email ( chargernut69@yahoo.com )  and we can sort out details for payment/shipping ...    Thanks.

Email sent.
Print
Go Up Pages1
User actions