1971 R/T - WIW

[XS88MAN]

Hi guys, sorry I don't have any pics but I am looking for opinions on what a project car would be worth. 1971 RT, motor and trans are gone, all the other original 71-specific parts seem to be there. Car will need a full restoration including rear quarters replaced. Floors and frame rails are solid. FT and other tags are present.
Plus where are the body stampings located on the 71 cars? Any help is appreciated. Thanks

[polywideblock]

body stamps are on drivers side  top rear face of the rad support above radiator and  on the cowl ,under the hood to cowl seal slightly inboard from the break booster     it will be there somewhere

[71 SE3834V]

I seem to remember the one on my radiator support was on the driver's side possibly under the radiator mounting plate. Might be a Lynch Rd thing.
Also one is under the deck lid seal on driver's side.

[polywideblock]

 on 71's it is on the cowl

[ACUDANUT]

on 71's it is on the cowl

Too bad Kern Dog is not here. On the 1971's, it is located on the cowl.

[71 SE3834V]

Correct.
There are 3. One on the cowl, one on the radiator support and one on the lip under the deck lid seal, drivers side.
I seem to remember on the radiator support mine was on the driver side. I don't have a pic and the car is not here to verify. I could be wrong. It could be on the top of the support.

[6bblgt]

there aren't 3 only 2 (core support & cowl)

no trunk lip on b-bodies after 1970 model year

[ralley72]

Correct.
There are 3. One on the cowl, one on the radiator support and one on the lip under the deck lid seal, drivers side.
I seem to remember on the radiator support mine was on the driver side. I don't have a pic and the car is not here to verify. I could be wrong. It could be on the top of the support.

You are correct, there are 3 places.

Mike

[6bblgt]

what b-body plant had trunk lip stampings '71 model year?  got any pics?

[71 SE3834V]

I'm going to have to side with 6bblgt here. I stand corrected. None on the deck lid driver's side (just looked) so unless it's somewhere else only 2.

Not only that but poly is also correct. Radiator support, dead center, on lip in front of radiator. Old fart brain couldn't remember back to 2014 when I refinished the engine bay. Always learning!

[XS88MAN]

This is a big help! Thanks guys