8 3/4 wheel studs

[68 charger freak]

 has anyone had problems with there wheel studs being to short when trying to mount aftermarket wheels? I'm having a problem locating longer wheel studs that have the correct knurl size for my 8 3/4 rear end. i can find longer studs but with the wrong knurl sizes, I was hoping not to have to drill out the holes in the axel .does anyone know of a source for the studs?

[green69rt]

You might call this guy.  He does a lot of suspension/brake sales and may have a source.

http://www.doctordiff.com/

[John_Kunkel]

If the wheels have conical seats, no need to change to longer studs, just get some extended lug nuts.

[68ChargerJMP]

Moser sells .625 knurl studs.

[Chargen69]

switched mine over to all right hand thread, from advance auto

[Windsor]

https://m.summitracing.com/parts/arp-100-7705
I went with these. Had to run them up to the machine shop and use the press to get them seated all the way. What under head length are you looking for?

[68 charger freak]

Thanks for the advice!