Hood Hinge Bracket Missing after Dip-(not sure where this should be posted)

[72Charger72]

So I finally got my car on the rotisserie after getting it dipped this spring and I start going over what all needs to be done and I find the
Drivers Side Hood Hinge Mounting bracket is gone. It was there before the dip.
Does anyone have one of these I could buy or know or where I can buy a repop? Its for a 72
Thanks

[hemi68charger]

Not sure AMD makes that component.. Just did a search and it looked slim...

I would think you could find this easily enough from sources on here or moparts.... There has to be many shells out there the bracket could be cut out........, spot welds drilled out and rewelded to your car...

[72Charger72]

Not sure AMD makes that component.. Just did a search and it looked slim...

I would think you could find this easily enough from sources on here or moparts.... There has to be many shells out there the bracket could be cut out........, spot welds drilled out and rewelded to your car...

Thanks  hemi68charger ... I was hoping someone would chime in that they have one....really sux I didnt catch this. I called the dipper and he said its long gone..

[67tbird]

Dont know where in MO you are located, but Clay Kossuth has 40 acres of Mopars at Catawissa MO(South of St. Louis) 636-257-4669

[72Charger72]

Dont know where in MO you are located, but Clay Kossuth has 40 acres of Mopars at Catawissa MO(South of St. Louis) 636-257-4669

Thanks 67tbird thats where I bought this shell from...not sure he has any b bodies left down there.

[billrabe]

These are available, I bought these for my 73 Charger and this is the same as the original.
https://www.autobodyspecialt.com/cgi-bin/commerce.cgi?preadd=action&key=MP-3448-1LH

[hemi-hampton]

I'm confused. If it's welded to the body how did it fall off during dipping? LEON.

[72Charger72]

I'm confused. If it's welded to the body how did it fall off during dipping? LEON.

One weld had broke before dipping and I was going to spot weld it back after wards....funny thing is I just took out the new inner fender panels and both have new brackets included so problem solved! 

[72Charger72]

These are available, I bought these for my 73 Charger and this is the same as the original.
https://www.autobodyspecialt.com/cgi-bin/commerce.cgi?preadd=action&key=MP-3448-1LH

Thanks billrabe!