440 valve covers: bolts, studs, or both?

[Dino]

For a '69 engine. I had aftermarket covers which had studs in the center and bolts on the corners. I've seen pictures where it's reversed and the studs are on the corners. How did they come from the factory?

[Charger-Bodie]

Two studs per head . At the corner.

[Dino]

Ah. Mine was wrong then. How short are the bolts supposed to be?

EDIT: Never mind, found it.

.5" long

[birdsandbees]

You can get the proper bolt and stud kit from Greg at Partsmix. Great to deal with.

[mopar0166]

I only use studs, with a cork gasket,  never have major leaks.  makes its easier to pull them or polishin etc, no need for silicone or spray adhesive

[70 sublime]

Two studs per head . At the corner.

Which 2 corners ?

[BLK 68 R/T]

Lower two at each end of the head.

[Charger-Bodie]

Lower two at each end of the head.

yep