68 Instrument panel wiring question

[ErikH]

Gentlemen,

I am in the process of reinstalling my instrument panel after replacing the tic-toc-tack.  The only wire I cannot figure out the placement for is a 3" wire that comes from a small cylindrical object (it reminds me of a condenser you would see beneath a distributor cap) which is screwed onto the cluster housing.  Where does the wire connect?

V/R

Erik

[cdr]

if you have the electronic cluster voltage regulator that is not used.

[ErikH]

As far as I know the cluster is completely stock.  As I look at the connector, it appears totally unscratched as if it were never plugged into anything.  If that is the case then it is not used for anything?  Odd.

[cdr]

it plugs in with the cluster voltage regulator

[ErikH]

That sounds logical.  Just a final check.  The center port where the voltage regulator plugs into the panel?

Thanks,

Erik