Torsion Bar Adjustment

[gcdsn76]

After rebuilding the front suspension, I've installed Mopar Performance .96 torsion bars. About how many turns on the adjustment screw will get me a good baseline ride height so I can drive it to the alignment shop? I figure with the stouter bars, the screws should not be turned as much as the stock bars.

[green69rt]

Read this WHOLE thread!!

http://www.dodgecharger.com/forum/index.php/topic,99879.0.html

[303 Mopar]

Be sure you make the adjustment with the front wheels off the ground, then bounce the front end and drive it around a bit to make sure it is the right height before paying for an alignment.