News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Speedo Cable Clips/Fasteners...

Started by csx4590, September 02, 2015, 01:27:36 PM

Previous topic - Next topic

csx4590

Once both ends of the speedo cable are hooked up, how many clips/fasteners hold it to the car? And where do they contact the car at???

Thanks,
Al

Lewis

I removed my dash and everything out the car and when I came across the speedo cable I found on mine it disconnects at both ends and pulled through a rubber grommet nothing holding it to the car, but that may be wrong I don't know that's just how mine was if that's any help :)

cdr

there is a clip near the brake proportioning valve  on the frame rail & then about in the middle of the driver side floor pan there is one  welded  to the pan
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr