Turn signal connector terminals. Are these unobtanium?

[Staxbro]

Remaking my dash harness from scratch. Wondering if it is possible to get the square connector pins in the turn signal connector ( harness end) I've had quite a thorough search, but turning up nothing. I don't really want to reuse any old wiring if I can help it.... Thanks.

[nascarxx29]

Maybe these on bottom of page. http://www.clipsandfasteners.com/mobile/category.aspx?id=259&404;http://www.clipsandfasteners.com:80/O_E_M_Terminals_Shells_s/259.htm=

[nascarxx29]

http://terminalsupplyco.com/Store/Default.aspx?CAT=DEL010&PCAT=54228#Categories

[A383Wing]

show a picture of what you are referring to.....I might have some new ones here I bought a while back

are they like pic below??

[Staxbro]

Thanks, Nascar and A383.
Yes in both cases they look like the things.
Seeing as you guys seem to have your fingers on the pulse of the vintage connector market- any ideas where I can get the fuse connectors which crimp on to some of the wires into the fusebox.
Sorry... No pics. Can't get iPhone pics on here for some reason.... Basically the fuse holder with a connector tab on the back.

[A383Wing]

Here is where I bought the twin-lock terminals for my cars, first one in the order sheet....you will have to purchase the special crimping pliers to do the job right, I got mine from Snap-On...was around $50

http://www.mouser.com/Connectors/Automotive-Connectors/_/N-1ehb5?Keyword=twinlock


As far as the fuse connector, you will have to try ebay and make something work from there

[Staxbro]

Okay- that's what I was thinking re fuse connectors. Thanks for the link.
Cheers, mate.
nick