News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

John K A518 trans UPDATE 9/5/15

Started by cdr, August 27, 2015, 04:50:41 PM

Previous topic - Next topic

cdr

hello John K.   as you know  on an A518 the governor pressure follows approx  1 psi per mph, my question is how high will the pressure go ?

Thanks charlie
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

John_Kunkel


Governor pressure can go as high a line pressure but, obviously, never exceed it.
Pardon me but my karma just ran over your dogma.

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

John thanx for a post you made on another forum, about transmission shift overlap ,my 1--2 shift was real bad after i put a tfod-3 manual valve body kit in, you suggested a#40 drill bit to the rear servo,  IT WORKS GREAT NOW!!!!!!   great fix!!!

thanx charlie
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

John_Kunkel


Sometimes the simplest things............ :2thumbs:
Pardon me but my karma just ran over your dogma.