Windshield reveal molding

[68lugnut]

Hi, I replaced the wiper cowl on my 68 Charger with a new panel that I bought from AMD. The problem I have and hope someone can help me with is where exactly to drill the new panel for the reveal clips to mount. It has the  indentions where they go but I don't know how far up/down to drill the hole. Thanks

[Hard Charger]

the bottom molding sits inside the reveal. so you have a margin of error. I believe the clip sits on the bottom of the recess's

just had the glass installed and replaced those clips.

[68moparbob]

I just took a measurement and from the center of the screw hole to the top edge of the cowl where it rolls over is 5/8".  There is a bit of variation from hole to hole of about 1/32". I have a couple good pics but I have not been able to post them yet.  PM me and I will forward them to you.

[68lugnut]

Thank you both for the helpful info.