Anyone rewire their 2nd Gen with an aftermarket complete harness?

[J-440]

 Evening all.  I have the Summit 16 circuit complete wiring harness for my 68.  I'm about 98% done and for the life of me I can't get my blinkers to work.  The kicker is that I'm using the Year-One engine harnesses and mating them to the Summit harness.  I also have a Flaming River column with a GM harness that is also interconnected to the Summit harness.  No biggy except these blinkers are kicking my ass!  Any help would be appreciated.

[c00nhunterjoe]

If they come on, but dont blink, suspect grounds. If they do nothing, trace power. Shouldnt be hard to follow with all nice new wiring.

[J-440]

 Yeah I traced the power wire and checked the fuses.  I even bought the LED flashers for under the dash.  The actual dash blinker lights are LED units with 2 terminals on the ends.  1 is for ground and the other is a 12v source correct?

[lukedukem]

Wow. You have three different harnesses to join together. I applaud you. I can't help you though, sorry. I used all new reproduction harness. Good luck

Luke

[J-440]

 Yeah I figured since I'm going the pro-touring route I'd better update the wiring to handle all of the modern comforts.