Blower installed!

[TexasStroker]

Very slick!  Looking forward to video and performance numbers!

[Charger4404spd]

What kind of intake & blower set up is that & it's size, & how much overdrive on the blower to get 8-10 psi of boost & what comp. are you running?

Its a Dyer's 8-71 kit. Funny, the intake is stamped BDS. Running it 5% underdrive and compression is 8.25:1.

[darkside]

Nothing says 80's hot rods  like a blower,love it!

[ACUDANUT]

Nothing says 80's hot rods  like a blower,love it!

x2 

[Challenger340]

I'll try to answer everyones questions.

Timing: Firecore dizzy locked out and will set @ 28° (per Ron)

Yes a second keyway was cut. With the pulleys I have, it should be around 8-10 lbs of boost.

72 440 block. Stroker kit from 440source (505 cu in) at .030" over.
Installed billet caps and stud girdle and all ARP fasteners. Custom grind from CompCams.
Eddy heads from Dwayne Porter.

Got the Quick Fuels on today.

That fawking thing is gonna ROCK !

[Charger4404spd]

[1974dodgecharger]

What kind of intake & blower set up is that & it's size, & how much overdrive on the blower to get 8-10 psi of boost & what comp. are you running?

Its a Dyer's 8-71 kit. Funny, the intake is stamped BDS. Running it 5% underdrive and compression is 8.25:1.

wow, your playing it safe then I bet you could do 10% if you wanted, huh?

[Roadrunner]

I see the intake &  the blower but is that a inner cooler in between the intake & blower?

[Charger4404spd]

I see the intake &  the blower but is that a inner cooler in between the intake & blower?

No, only a spacer.

[ottawamerc]

Well say good bye to your straight sheet metal!  That beast is gonna twist your car around... Awesome project 

Scott