Gear vendor for 4 speed?

[cavemanno1]

Sorry if my question is stupid but i only read about GV with 727s!
Could you get a GV for a 4 speed?If not what why not and what else people use instead?

Thanks,
Peter

[Kern Dog]

Yes.

[fy469rtse]

Look up passon's factory fitting 5 speed in place of 4 speed

[Rolling_Thunder]

Yes - you can get the GV unit for the NP 833 transmission....     

[1974dodgecharger]

Look up passon's factory fitting 5 speed in place of 4 speed

I would rather do this than GV and right around the same price with no MODs to driveline this be your best bet and you get a bigger drop in RPM than GV can provide at given gear.

[c00nhunterjoe]

Isnt there a 3-5 year wait on the 5 speed? 

[1974dodgecharger]

Isnt there a 3-5 year wait on the 5 speed? 

no, one year wait Ill check the email again, but Jamie told me 4 weeks ago it was one year wait on it.  If I knew where my money was gonna go I would get on the list very well worth it based on my gear ratio, tire diameter, etc...I would be spinning 1800rpm going 80 vs my 3k I spin now and with GV it was only going to drop 600rpm so to me not worth it.

[Kern Dog]

They said
"One year wait" five years ago. They have had some unforeseen problems with suppliers and such, but the huge $$$ for the Passon sorta limits its appeal too.

[six-tee-nine]

I have a 18 spline unit for mine on the shelf.

If I ever want an extra gear I'll go with the Passon unit. I can Always sell the 4 speed and that returns me some extra cash. IMO the best option with a 4 speed over the GV