WANTED! Wiring and hose schematics - Superbird

[rainbow4jd]

This summer I'll be putting in the wiring harnesses and hoses on my Bird restoration.    

Does anyone have some good reference materials for this - OR reference photos.      At some point, we might have to come visit someone and just take a look (Doug maybe) OR if anyone is bringing their Bird to the Mopar Nats - we could maybe see it there.

The point is - we want to do it correctly and could use some good reference guides/photo guides.    If anyone has recommendations its always appreciated.

[62 Max]

One thing you want to do is locate the vacuum hoses in the correct place on top of the inner fender,75% of the cars you see have them routed along with the wiring harness and that is wrong !

[FJ5WING]

Hey Bill...That's a good point! Its easy because the repop harnesses don't have the plastic do hickeys to plug into the fender tops.

As a side question, Is that the original location for the emissions decal? I didn't reference mine before the disassembly.

[62 Max]

Dave,that is about where the original was,could be off a little but not by much.

[nascarxx29]

vacuum diagram by hemi genos from fact manual
http://www.dodgecharger.com/forum/index.php/topic,19205.msg210542/topicseen.html#msg210542

[nascarxx29]

http://www.mymopar.com/index.php?pid=27

[rainbow4jd]

YOU GUYS ARE THE BEST!