Need help with 440

[Charger_70]

Needing help trying to figure out what this 440 came out of .. motor already in car and i cant find the # on the block .... only numbers i can see is on headers.. 4041468... and on valve cover it has 413emo7 or m07 not sure... any ideas? just tryin to figure out if i need to buy parts thx for the help

[Cooter]

Pic...NEEDED of pad beside distributor. Should be numbers/symbols stamped in it.

[Ghoste]

Did you look for numbers down at the bottom of the block just above the oil pan or just up high?

[Charger_70]

Ok so far only thing i have found out is that the motor was a 77 model... just dont know what...

[Ghoste]

Did you look for the stamped pad on the side of the block?

[John_Kunkel]

The machined pad in front of the intake manifold will have the build info., the machined pad above the pan gasket on the passenger side will have a partial VIN....those two should tell you all you want to know.

[ACUDANUT]

Pic...NEEDED of pad beside distributor. Should be numbers/symbols stamped in it.

Wrong. Look at the drivers side, opposite of the distributor and find a 2 inch tab. It should read 440.
Pic's of the entire front engine will help us. Don't forget to show a pic of the crank balancer.

[Cooter]

Pic...NEEDED of pad beside distributor. Should be numbers/symbols stamped in it.

Wrong. Look at the drivers side, opposite of the distributor and find a 2 inch tab. It should read 440.
Pic's of the entire front engine will help us. Don't forget to show a pic of the crank balancer.

See this is exactly what I'm referring to in my post about what I have to chuckle at.
I stated the EXACT same thing....really? And I'm wrong somehow?
The "pad" is beside distributor socrates.

[ACUDANUT]

The pad is opposite side of distributor.

[Cooter]

Face palm...

[ACUDANUT]

palm face