727 Specialist in Indiana?

[Ghoste]

Not Torqueflites by Randy?

[72Charger-SE]

Those look like 2 or 3 ton jack stands.  Personally I would use 6 ton jack stands...  The 6 ton give a much safer base to work from (IMO).

I believe I would use the Rhino Gear Car Ramps to lift the front and use the front wheels as your base.   Then use the 6 ton jack stands for support and rear height.  I 'think' that would work??

[kole32]

I talked to 727 specialist about doing an a518 out of my 93 cummins. He didn't know what he was talking about when I called him.

[MxRacer855]

Those look like 2 or 3 ton jack stands.  Personally I would use 6 ton jack stands...  The 6 ton give a much safer base to work from (IMO).

I believe I would use the Rhino Gear Car Ramps to lift the front and use the front wheels as your base.   Then use the 6 ton jack stands for support and rear height.  I 'think' that would work??

I actually have front ramps that are very similar to those... It's possible that will work, as long as the front suspension doesn't compress too much. if it did, then I would be better off using jack stands all around. And yes, unfortunately they are only 3 ton... at least they're not 2 ton stands!

Jeff