News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

How to tell UCA's

Started by will, August 19, 2013, 09:34:09 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

will

August 19, 2013, 09:34:09 AM
How can you tell which side UCA goes on which side? I am in the process of switching over to Firm Feel UCA's and I can decide which side the spindle goes on. To make it more confusing I swapped over to SSBC discs so my dilemna is compounded. Which way is the dimple on the factory UCA supposed to face.  :brickwall:

cdr

#1
August 19, 2013, 10:03:04 AM
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

will

#2
August 19, 2013, 10:48:30 AM
great, that's what i needed.

SUPERSTAR14

#3
August 20, 2013, 06:39:56 AM
There is a provision on the UCA for the bump stop.
-Pat
Print
Go Up Pages1
User actions