Gauge cluster screws

[Brian in GA]

Can anyone tell me what size screws are appropriate to install the cluster in the dash frame?  I'm rebuilding an old junkyard car and it was missing the cluster, and I've gotten a replacement, and now I need to attach it. 

Thanks!

[bull]

If you want stock they are a fillister head bolt and the only place I've seen them is at R/T Specialties.

They might not list them on their website but they do have them: http://www.rtspecialties.net/

[Brian in GA]

Thanks, bull.

Do you have an idea what might work that I could pick up at the local hardware/auto store?  Stock's really not that important to me for this particular application.   

[MaximRecoil]

They are just sheet metal screws, #8 I believe. Any head type that will physically fit in the bezel's holes will work. My cluster has all of its original fillister head screws except for one, which some previous owner replaced with an "oval countersunk" head screw. It works, though due to its tapered head, I doubt it makes as good of a ground as head types that are flat on the underside. I added a dedicated ground wire to my cluster though, so the grounds through the mounting screws don't really matter.

[bull]

Actually, they do list it: http://www.rtspecialties.net/proddetail.asp?prod=1000100A

[nascarxx29]

If your junkyard hopping The headlight retaining rings might have used these type screws

[Brian in GA]

Thanks guys!  Got 'em online.

I appreciate the link, bull.