MOPAR JOHNS EK2 SUPERBIRD RESTORATION!!

[Mopar John]

So basically it is just making the idle a bit faster all the time until you turn the key off so the idle drops some and helps the engine stall out ?

Yes!

[FJ5WING]

Another jewel added to the crown! Nice work John! I also had Scott restore my Idle solenoid when he was restoring my Holleys for the Superbird!

[Mopar John]

Another jewel added to the crown! Nice work John! I also had Scott restore my Idle solenoid when he was restoring my Holleys for the Superbird!

Dave,
 Thanks for the kind comments on the Superbird!
I know when you were restoring yours you were trying for that same level of results!
Sad that you no longer have it but glad your still active here.
MJ

[Mopar John]

               SUPERBIRD PASSENGER SIDE VALVE COVER OIL BREATHER GROMMETS
Recently I found a couple of NOS drivers side valve cover PCV valve grommets for my Superbird.
When I checked my stash I did not find any for the passengers side valve cover oil breather?
After doing some checking I found out that there are at least 3 versions out there!
The first version is the factory assembly line grommets that came on our Superbirds when they where built.
These have a 2946 079 part number with a space between the 6 and 0.
They also have a vendor code of 58418 with no Pentastar!
I see these on unrestored original Superbirds and those with high level restorations.
My first 2 pictures show these grommets.
The next grommet came along in the 1970's and are showing up on a lot of the restored Superbirds.
These have a 2946079 part number with no space.
The also have a vendor code of 99201 and have a Pentastar molded in!
I show these in my third and fourth pictures.
The last version which is available now has the same 2946079 part number.
But the top side of the grommet is smooth and the part number is on the underside where you can't see it!
I show this in my last picture.
MJ

[taxspeaker]

The detail continues to amaze me. Thanks for it! Makes me wonder about mine!

[Mopar John]

The detail continues to amaze me. Thanks for it! Makes me wonder about mine!

Thanks Bob!
 I am glad someone is still interested in "ORIGINAL" details!
MJ

[Mopar John]

                    SUPERBIRD ORIGINAL REAR ARM REST BASES 1250BZ1
So for years when I was parting out cars I would save the rear arm rest bases.
Most of them were wore out on the top side but they were reversible side to side.
When I started gathering NOS parts in the early 2000's I started to look for  pair of NOS bases.
I even have a want ad in the parts section on this site!
I didn't find any in time for the Daytona restoration or the Superbird restoration.
So we used originals that were re-chromed.
The originals are part number 1250BZ1
I finally found an orphan NOS base about 5 years ago.
Just recently I finally purchased another orphan to make my pair of NOS bases!
It was listed incorrectly as a front base but did have the correct part number.
My first picture shows the 2 NOS bases and packaging.
The second picture shows a close up of the outside.
The third picture shows a close up of the inside.
I would like to note here that the inside cavities of the back side are gray in color.
Most re-chromes are all chrome in these areas!
The last 2 pictures show the 1250B part number molded in and an AASQ code molded in along with a Pentastar!
ENJOY! MJ