Working on my belts, mainly a clean, paint, and dye job, but the vinyl that is laminated to the latch tops is bubbled up in a few places. Going to try to cammo this with a spatter texture, but in the event it doesn't work, how do these things come apart? :shruggy:
The dimpled riveted ends are pressed together. When I redid mine and powder coated them, I used a thin flat head screw driver and pried up on the one end of the rivet. Be VERY CAREFUL as it is only a thin post on the end of the dimpled rivet and can break or snap off very easily. Installation is just in the reverse order by pressing them back together.